Just Labradors banner

1 - 9 of 9 Posts

·
Registered
Joined
·
5,276 Posts
Weave polls are very easy to make, it's the first thing we made. Jumps are easy as well, depending on how elaborate or simple you want them to be. I'm not sure how you would make a tunnel though, I just bought mine since it's Jake's favorite piece of equipment and sending him through makes for a great reward every now and then. We got it from Affordable Agility.

Something even better to make would be a ladder or a buja board. The ladder teaches (or reminds) the dog that he has back feet as well as front feet! That'll be important for agility (dog walk, teeter, jumps, etc.). The buja board (which can just be plywood with a partially deflated ball underneath) helps with balance and gets the dog used to things moving under their feet (like the teeter).

I used this site to make the ladder, I think they have weave poll instructions as well http://www.peak.org/~helix/Agility/

And just a reminder, since it looks like Merlin isn't a year old yet you'll want to go easy on training the weaves (the bouncing action can be hard on their joints) and no jumping higher than his hocks (even better would be just a couple inches off the ground. Jake is 18 months and we still only jump 16" once in a blue moon at class.

Good luck and have fun building!!
 

·
Registered
Joined
·
3,414 Posts
Here is the agility course in my backyard. I also have a tunnel. I made all of the equipement myself, and believe me I am not talented in that kind of thing!

 

·
Registered
Joined
·
268 Posts
Discussion Starter #4
Bells Mum, that looks awsome!! :D :eek: ;D


I made a 20inch gap between each post. And not as many posts as I would have liked, I ran out of T-pieces, because I forgot that it needed arm each side to keep it stable ::)

Ive run taken Merlin through it a few times, and by jolly I think he's getting it already!!! ;D



The 'stucture', looks like a fly could knock it down. :p
 

·
Registered
Joined
·
5,276 Posts
looks good!!
 

·
Registered
Joined
·
3,414 Posts
merlin said:
Bells Mum, that looks awsome!! :D :eek: ;D

I made a 20inch gap between each post. And not as many posts as I would have liked, I ran out of T-pieces, because I forgot that it needed arm each side to keep it stable ::)

Ive run taken Merlin through it a few times, and by jolly I think he's getting it already!!! ;D



The 'stucture', looks like a fly could knock it down. :p
My weaves are just individually stuck in the ground. I used a piece of reinforcing rod (and a few arrows), and then stuck the pvc pipe over it. That way you can angle them if you wish.
 

·
Registered
Joined
·
5,187 Posts

·
Registered
Joined
·
10,258 Posts
Yes, with the exception of the tunnels and chutes, I've made all my stuff myself.

I did end up having a friend weld me a base for the weaves. Ruger kept busting the PVC weave's I made :)
 

·
Registered
Joined
·
268 Posts
Discussion Starter #9
My poles can adjust, and tilt. coz each pole has its own t-piece. So would I start by angling each one opposite so merlin doesnt have to bend so much to get around at first?

I did a bit of research into agility, but it was only after I made my poles that I read that the weave poles are the hardest for the dog to learn. And some get it, some just dont! agh!
 
1 - 9 of 9 Posts
Top